Audi/VW Adaptor Pad (18M-P09)
BUY 1
Save 0%
BUY 2
Save 16.66%
BUY 4
Save 24.98%
Rennstand® Pad specs
Shipping & Returns
Returns for Non-Defective Items
If you decide the product isn’t right for you, we accept returns under the following conditions:
- Returns must be requested within 30 days of delivery
- Items must be unused, uninstalled, and in original packaging
- The customer is responsible for return shipping costs
- A 10% restocking fee will be deducted from the refund to cover inspection, handling, and repackaging
Refunds are issued to the original payment method once the item is received and inspected.
Non-Returnable Items
- Products showing signs of use, installation, or damage
- Items returned without prior authorization
- Clearance or final-sale items (if applicable)
How to Start a Return
To initiate a return, contact us at sales@rennstand.com with your order number and reason for return. We’ll provide return instructions once approved.
12-Month Warranty
All RennStand products include a 12-month warranty against manufacturing defects.
- If a product is defective, we will repair or replace it at no cost to you.
- If an item arrives damaged due to shipping, please contact us within 48 hours of delivery with proof of damage from shipping and we will send a replacement.
Lift it up in
3 Easy Steps
Designed to lift and support your vehicle at the factory-designated jacking points.
1. Jack up the car at the factory jackpoint
2. Insert the height-adjustable legs
3. Lower and remove the jack
Why RennStand®?
✔️ Prevents Damage to Your Vehicle
The only stand that places the jack and jack stand at the correct lift point. Always.
✔️ RennStand® is Patent Protected
We stand behind our products and quality. All steel construction with a 3-ton rating.
✔️ Lightweight and Compact
Extremly simple to use while being compact and light enough to carry in your vehicle.
FAQs
Please read our FAQs page to find out more.
HOW MUCH WILL THE RENNSTAND SUPPORT?
We have rated the RennStand for 3 tons US or 2,722 kg. If your vehicle weighs 5000 lbs. the most you would support with one jack or jack stand is half of that since the vehicle is also supported by its tires or other jack stands that share the weight. A 5000 lb. vehicle might put as much as 2500 lbs. on a jack stand and that is only 42% of the stands rating. The more stands, the lower the loading on each stand because they are sharing the load. In addition, the stands are all tested in accordance with ASME standards to at least 150% of the rated load (9,000 lbs.) but please do not exceed the 6,000 lb. load rating for safety reasons.
HOW LOW WILL IT GO?
The RennStand adds approximately 1.9 inches or 50 mm to the lowest setting of your jack including the jack pad. The lowest setting while on its legs is 11.5 inches or 292 mm.
HOW HIGH WILL IT GO?
The RennStand will go to roughly 16.5 inches or 419 mm. We have plans to produce other versions that will go higher for lifted vehicles.
WHAT TYPE OF JACK IS REQUIRED TO USE THE RENNSTAND?
The RennStand requires a wheeled floor jack. The jack cannot be wider than the space between the legs. The RennStand will accept floor jacks that are up to 12 inches (305mm) wide. In addition, the floor jack should have a flat lift saddle with a center recess that is at least 3 inches (76mm) in diameter.
WHAT VEHICLES DO THE RENNSTAND FIT?
The RennStand fits most vehicles. There are so many different vehicles and changes from year-to-year, but typically one of our jack pads will be suitable. We also add jack pads to our product line as we are able to.
Adaptor Pads
